Stovax Riva Plus Midi Wood & Multi-fuel - Manual (Page 28)

28
MAINTeNANCe and seRVICING
• Press the new Stovax rope into the locating groove,
placing the joint in the middle of the lower edge of the door
• Refit the door and close the door to apply pressure to the
new rope
• Leave the appliance closed for at least 12 hours before
lighting the appliance and using at a low output for
approximately one day
8.2 Using the appliance with a damaged door seal can cause
dangerous fumes to enter the room, or the appliance to
over fire, resulting in damage.
9. AdJUsTING dooR HINGes
9.1 To maintain the safe use of your appliance, you may need
to adjust the door hinges to ensure the door closes safely
and correctly.
9.2 To complete this operation:
• Open the door to give access to the fixed part of the door
hinge as shown
Fixing Nut Lock Nut
PR7087 PR8116
Inside nut is prevented from
turning
• Use a 19mm A/F spanner to loosen the fixing nuts
• Reposition the hinge blocks to achieve a correct fit
This may require several adjustments to find the correct
position.