User instructions – Stovax Riva Plus Midi Wood & Multi-fuel User Manual

Page 7

Advertising
background image

7

UseR INsTRUCTIoNs

5.3 Experience establishes settings to suit personal preferences.

PR8035

Opti Burn Position

Position 1: Full Running

Position 2: Opti-Burn

Adjust left to reduce output

• Lowest heat out put for burning wood (Opti Burn). This

position helps keep the glass clean, Diagram 9

Shut Down Position

PR8027

• Lowest possible heat out put for burning wood. This

position does not keep the glass clean, Diagram 10

5.4 Do not burn large amounts of fuel with the Airwash control

closed for long periods of time. This reduces the glass

cleaning effect and causes tars and creosotes to build-up in

the appliance and flue system.

5.5 When in use, burning the appliance at high output for a

short period each day also reduces tars and creosote.

5.6 Multi-fuel stove:

The Solid Fuel setting is from the Centre to the Left

The Wood burning setting is from the Centre to the Right

Once the fire becomes established:

• Move the control from the wood start up position, See

Diagram 6, to the Multi-fuel position on the left, Diagram

11

PR8032

• Minimum position for burning solid fuel, Diagram 11

PR8035

• Maximum position for burning sold fuel. This position

helps keep the glass clean.

A de-dent ball will locate the arm in the correct position see

Diagram 12.

5.2 De-ash the fire bed before re-fuelling, See Ash Removal

• Open the Control fully to establish a glowing bed before

adding new fuel

• Burn new fuel at high output for a few minutes before

adjusting the Control to the desired setting

• Refuel little and often for clean, efficient burning.

5.3 Experience establishes control settings to suit personal

preferences.

Full Heat Position

PR8036

Advertising