GE 27958 - Manual (Page 31)

31
NOTES: If you find it necessary to dial all local calls with the area codes included
press and hold flash/program until SET AREA CODE appears, then enter 000.
If the number is corrupted, such as a number in a name or an alphabetical
character in a number, an error tone comes from the handset and the number
won't dial.
D
ELETING THE
C
URRENT
C
ALLER
ID R
ECORD
To delete only the record in the display:
1. Use the MESSAGES/CID ( or ) button (base) or cid/vol ( or )
button (cordless handset) to display the desired Caller ID record.
2. Press DELETE (base) or chan/delete (cordless handset) button. The display
asks DELETE CALL ID? for several seconds.
3. PressDELETE (base) or chan/delete (cordless handset) again, within ten
seconds, to erase the record.
The display shows **DELETED**, confirming the deletion.
D
ELETING
A
LL
C
ALLER
ID R
ECORDS
To delete all the Caller ID records in memory:
1. Use the MESSAGES/CID ( or )button (base) or cid/vol ( or )
button (cordless handset) to display any Caller ID record.
2. Press and hold DELETE (base) or chan/delete (cordless handset). The
display asks DELETE ALL? for several seconds.
3. Press DELETE (base) or chan/delete (cordless handset) again, within ten
seconds, to erase all records. The display shows NO CALLS.
C
ALLER
ID E
RRORS
If there is an error in the transmission of information to your Caller ID
phone,
ERROR shows in the display.
If you have not subscribed to Caller ID service or it is not working, NO
DATA shows in the display.