Moxa Technologies CP-118U - Manual (Page 51)

CP-118U User’s Manual Software Installation
3-39
6. Select MOXA Smartio/Industio Family multiport board in the Select OEM Option
window, and then click on OK to start installing the driver.
7. The Moxa Smartio/Industio Configuration Panel window appears. Click on Add to open
the Property configuration window to change port settings and set advanced FIFO
configuration options.
8. Continue from Step 3 in the next section, “Configuring the Ports.”
Configuring the Ports
Follow the instructions in this subsection if the CP-118U Windows NT driver is already installed,
and you wish to re-configure a board’s ports or configure the ports of a newly installed board. In
addition to the procedures listed below, you may also click on Start # Programs # MOXA
Utility # MOXA Smartio/Industio Configuration Panel # Property, and then refer to the
instructions in the previous section, “Installing the Driver for the First Time.”