Moxa Technologies CP-118U User Manual
Page 56
Advertising
CP-118U User’s Manual
Software Installation
3-44
Removing the Driver
To remove the CP-118U driver:
1. Open the Control Panel, click on the Network icon, and select the Adapters tab.
2. Click on MOXA Smartio/Industio Family Adapter in the Network Adapters list to
highlight it.
3. Click on Remove.
4. Click on Close, and then restart the system.
Updating the Driver
To update the CP-118U driver:
1. Remove the current driver (see the previous subsection for instructions).
2. Restart the system.
3. Install the new driver. Refer to the “Installing the Driver for the First Time” section for
instructions.
Advertising