Moxa Technologies CP-118U - Manual (Page 8)

CP-118U User’s Manual Introduction
1-4
Installation Flowchart
The following flowchart gives a brief summary of the procedure you should follow to install the
CP-118U board and which chapters to refer to for more detailed information:
Use the onboard DIP Switches to select the
data transmission mode for each port.
Chapter 2, “Hardware Installation”
Install the board in a PCI or PCI-X
expansion slot.
Chapter 2, “Hardware Installation”
Install the driver and configure the board
and ports.
Chapter 3, “Software Installation”
Connect the serial devices to the CP-118U
board’s serial ports.
Chapter 5, “Pin Assignments”
Restart the system, and check the driver
initialization status.
Chapter 3, “Software Installation”
Develop and run your serial
communication applications
Chapter 4, “Serial Programming Tools”