Moxa Technologies CP-118U User Manual
Page 52
Advertising
CP-118U User’s Manual
Software Installation
3-40
1. Open the Control Panel, click on the Network icon, and then select the Adapters tab. Click
on MOXA Smartio/Industio Family Adapter to highlight it, and then click on Properties.
2. Select the board whose ports you wish to configure to highlight it, and then click on
Property.
3. Select the just installed CP-118U board from the Board Type pull-down list, click on a
specific port to highlight it, and then click on Port Setting to configure the port.
Advertising