Moxa Technologies CP-118U - Manual (Page 62)

CP-118U User’s Manual Software Installation
3-50
SCO
MOXA provides drivers that allow you to use the following serial board products under Linux.
! Universal PCI Boards: CP-118U, CP-168U, CP-104UL, CP-104JU, CP-102U, CP-102UL
! PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI
! ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS
Follow the steps given in this section to install the SCO driver. Note that the SCO driver provided
by Moxa only supports RS-232. Consequently, the SCO driver will only work with CP-118U ports
that are configured for RS-232. MOXA provides drivers for the following versions of SCO:
! SCO OpenServer
! SCO UnixWare 7
! SCO UnixWare 2.1
The following steps are for installing the driver under SCO OpenServer. The installation
procedures for SCO UnixWare 7 and SCO UnixWare 2.1 are similar.
1. Copy the driver file .tar to your host.
2. #tar xvf <driver tar file>
/tmp/moxa/mxintall
/tmp/moxa/sco.tar
3. # cd/tmp/mxinstall
# ./mxinstall
4. The window shown below will open next. Press any key to continue.
Copyright© 2004 Moxa Technologies Co., Ltd.
All Rights Reserved.
MOXA Smartio Family Device Driver Installation (Ver. 1.6)
For SCO UNIX System V/386 Release 3.2
Tar files, please wait…..O.K.
Press any key to continue