Moxa Technologies CP-118U - Manual (Page 63)

CP-118U User’s Manual Software Installation
3-51
5. The Basic Configuration window will open next. You can install up to four MOXA Smartio
Multiport Serial Boards under SCO Unix/SCO Open Server.
MOXA Smartio Family Installation Utility (Ver 1.6)
Smartio Family Basic Configuration
Board No. Board Type I/O Address Interrupt Bus/Dev No.
1 None ------------- ------------- -------------
2 None ------------- ------------- -------------
3 None ------------- ------------- -------------
4 None ------------- ------------- -------------
PgDn: getty Setting
Enter: Confirm Input Value
Esc: Exit
Tab: Change Item
6. Press Enter to select the MOXA Multiport Serial Board you installed. For example, select
“CP-118U” and then press Enter.
None
CP-118U
C168 ISA Series
C104 ISA Series
C168 PCI Series
C104 PCI Series
CP-104U Series
CP-168U Series
CP-104JU Series
CP-102U
CP-102UL
7. The board’s basic information, such as I/O address, Bus No., and Device No., will be shown
next. Resources will be assigned by the SCO system to the PCI board you selected.
PCI Boards Selecting
1 I/O Addr= AC00, BusNo=2, DevNo=13
Enter: Select ESC: Exit