Motorola MVME166IG/D2 - Manual (Page 101)

Set Environment to Bug/Operating System
MVME166IG/D2 A-9
A
Master Ending Address #2 00000000 Ending address of the VMEbus
resource that is accessible from
the local bus. Default is
$00000000.
Master Control #2 00 Defines the access characteristics
for the address space defined
with this master address
decoder. Default is $00.
Master Enable #3 [Y/N] N Yes, setup and enable the Master
Address Decoder #3. This is the
default if the board contains less
than 16MB of calculated RAM.
Do not set up and enable the
Master Address Decoder #3.
This is the default for boards
containing at least 16MB of
calculated RAM.
Master Starting Address #3 00000000 Base address of the VMEbus
resource that is accessible from
the local bus. If enabled, the
value is calculated as one less
than the calculated size of
memory. If not enabled, the
default is $00000000.
Master Ending Address #3 00000000 Ending address of the VMEbus
resource that is accessible from
the local bus. If enabled, the
default is $00FFFFFF, otherwise
$00000000.
Master Control #3 00 Defines the access characteristics
for the address space defined
with this master address
decoder. If enabled, the default
is $3D, otherwise $00.
Master Enable #4 [Y/N] N Do not set up and enable the
Master Address Decoder #4.
Master Starting Address #4 00000000 Base address of the VMEbus
resource that is accessible from
the local bus. Default is $0.
Master Ending Address #4 00000000 Ending address of the VMEbus
resource that is accessible from
the local bus. Default is $0.
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default