Motorola MVME166IG/D2 - Manual (Page 104)

Configure and Environment Commands
A-12 MVME166 Single Board Computer Installation Guide
A
VSBC2 Slave Address Offset #1 00000000 Address offset for the first VSB
to local bus map decoder. The
upper 16 bits of this field will be
added to the upper 16 bits of the
VSB address received. This sum
is then the address driven onto
the local bus address lines.
Default = 00000000.
VSBC2 Slave Attributes #1 0400 The bits in this register control
various aspects of how the first
VSB to local bus map decoder
will operate. Consult the
VSBchip2 register definition in
the MVME166 programmer’s
reference guide for an
explanation of each bit. Default
= 0400.
VSBC2 Slave Starting Address #2 00000000 Beginning address of an address
range for the second VSB to local
bus map decoder. Only the
upper 16 bits of this field are
significant (or used). Default =
00000000.
VSBC2 Slave Ending Address #2 00000000 Ending address of an address
range for the second VSB to local
bus map decoder. Only the
upper 16 bits of this field are
significant (or used). Default =
00000000.
VSBC2 Slave Address Offset #2 00000000 Address offset for the second
VSB to local bus map decoder.
The upper 16 bits of this field
will be added to the upper 16
bits of the VSB address received.
This sum is then the address
driven onto the local bus address
lines. Default = 00000000.
VSBC2 Slave Attributes #2 0400 The bits in this register control
various aspects of how the
second VSB to local bus map
decoder will operate. Consult
the VSBchip2 register definition
in the MVME166 programmer’s
reference guide for an
explanation of each bit. Default
= 0400.
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default