Miele DA 337 I - Manual (Page 19)

Inserting / replacing the active
charcoal filter
For recirculation mode an active char-
coal filter must be used in addition to
the grease filters. It is designed to ab-
sorb cooking odors.
The active charcoal filter is inserted into
a slot on the front of the appliance
housing.
Replacement active charcoal filters
can be ordered from the Miele Tech-
nical Service Department at
1-800-999-1360.
Please quote
part number 28 9961 34
Follow the instructions supplied with
the active charcoal filter when inserting
it.
When inserting the active charcoal filter
for the first time:
Set the filter hour counter according
to your cooking needs, (see ”Oper-
ation - Changing the filter timer”).
Replace the filter immediately when
the active charcoal filter indicator
lights, or if it is no longer effective in
absorbing kitchen odors. It should,
however, be replaced at least every
6 months.
After inserting the new filter, press
the active charcoal filter button for
approximately 4 seconds to re-set
the filter timer.
Cleaning and care
19