Miele DA 337 I - Manual (Page 23)

Safety regulations prohibit the instal-
lation of this hood over a solid fuel
stove.
The minimum safety distance be-
tween the top of the cooktop and
the bottom of the hood should be at
least:
– 18” (450 mm) above electric
cooktop
– 26” (650 mm) above gas
cooktops
– 26” (650 mm) above a Miele open
grill
A distance of 26” (650 mm) is rec-
ommended for all installations to
allow more work space under the
hood.
For other manufacturer’s appliances
maintain the safety distance as rec-
ommended in their Installation and
Operating instructions.
If there is more than one appliance
beneath the hood and they have dif-
ferent minimum safety distances, se-
lect the greatest minimum safety dis-
tance.
See ”Warning and Safety instructions”
for further notes on safe installation.
** back panel of upper cabinet may
have to be removed to reach these
depths (see warning box on next page).
The minimum cabinet height required is
460 mm, to ensure that the exhaust
ducting can be fitted to the vent con-
nection without difficulty.
– The appliance is suitable for installa-
tion in either a 23 5 / 8 ” or 27 9 / 16 ” (60
cm or a 70 cm) wide cabinet.
– If fitted in a 23 5 / 8 ” (60 cm) wide
cabinet the lower edge of adjacent
cabinets must not exceed the depth
of the appliance housing unit.
Please make sure that there is
enough clearance under these
cabinets before installing the hood.
– The slot for the active charcoal filter
b must remain accessible if the ap-
pliance is used in recirculation mode.
Appliance dimensions
23