Miele DA 337 I - Manual (Page 20)

Changing the light bulb
Before changing the light bulbs, dis-
connect the hood from the power
supply by either removing the fuse,
unplugging it, or manually ”tripping”
the circuit breaker.
Make sure that power is not re-
stored to the appliance while main-
tenance or repair work is performed.
When in use the halogen bulbs
become extremely hot and can
cause burns. Do not attempt to
change bulbs until they have had
enough time to cool.
Do not touch the surface of a ha-
logen bulb, fingerprints or body oils
deposited on the bulb will decrease
the life of the bulb. Please follow the
manufacturer’s instructions.
Remove the external filter, (see
”Cleaning and Care”).
Loosen the halogen lamp fixing
screw and push it downwards.
Tighten the fixing screw up.
Turn the halogen bulb half way to the
left and pull it downwards to remove
it.
It is advisable to use the following
specification halogen bulb in this
appliance:
OSRAM Halopar 16 Cool Beam,
120 V, 50 W, GZ 10, Typ-Nr. 64827.
Insert the new halogen bulb by re-
versing the above procedure.
Cleaning and care
20