Miele DA 337 I - Manual (Page 28)

Installation procedure
1. Non-return flap (if needed)
2. Reducing collar (if needed)
3. Fit the runners in the cabinet
4. Hang and align the cabinet door
5. Position the appliance in the cabinet
6. Align the height of the appliance
7. Align the depth of the appliance
8. Fit the side spacers, the spacer
strip, and the light cover
9. Set up for air extraction or recircula-
tion
10. Connect to the electrical supply
Prepare the vent connection/ vent
socket for air extraction or recirculation
before installation.
1. Non-return flap
Air extraction with integrated fan
Fit the non-return flap into the vent
socket so that the flaps can open up-
wards.
(This is not necessary if the ducting
system is already fitted with a non re-
turn flap, e.g. wall vent).
Air extraction with external fan
The non-return flap is integrated into
the vent socket.
Recirculation mode
When used in recirculation mode it is
not necessary to fit a non-return flap.
Installation
28