Miele DA 337 I - Manual (Page 30)

Fit the runners
(Standard cabinet: 23
5
/
8
” (60 cm)
wide, 16 mm thick cabinet wall sides)
Hold the runner against the cabinet
so that the lower edge of the runner
is flush with the cabinet. The first row
of screws must be aligned with the
pencil marks.
The ”16 mm" marking should face up-
wards.
Secure each runner with four
4,0 x 16 mm screws.
Note: Please refer to the ”Special instal-
lation instructions” at the end of the ”In-
stallation” section for instructions on in-
stalling the appliance into a cabinet
with 19 mm thick walls or into a 27
9
/
16
”
(70 cm) wide cabinet.
4. Hang the cabinet door
Before installing the appliance, hang
and align the cabinet
door.
Use the special tool
supplied, if you need
to re-align the
cabinet door after the
appliance has been
installed and the
hinges are no longer
accessible.
Installation
30