Reset all, Reset lamp life, Trigger2 – Marantz VP-12S1s User Manual

Page 23: English

Advertising
background image

19

OPERATIONS

ENGLISH

Select 12V DC or 0V from on and off at each aspect mode.
Full, Normal, Zoom, and Through.

On: Output DC 12V.
Off: No output.

This allows such as a powered dual aspect screen according
to the aspect mode.

Picture Adjust
Setting
Display
Config

Full
Normal
Through
Zoom

Off
Off
Off
Off

Trigger 2
Memory

Trigger2

– Reset Lamp Life

When replace the lamp unit, before the Lamp Life becomes
"0" hours need to reset lamp life.
When the user selects “Yes”, the following message appears:

Again, select “Yes”, and press the ENTER key. Then the
lamp life is initialized.

– Reset All

All settings goes to the factory default settings except the
lamp life.
When the user selects “Yes”, the following message appears:

Again, select “Yes”, and press the ENTER key.

Reset All ?

Yes

No

Reset Lamp Life ?

Yes

No

Recall the stored memory for preference. The unit has three
picture modes: THEATER, STANDARD, and DYNAMIC.
Each picture mode has three picture memories.

– Store memory

Select Memory mode from THEATER, STANDARD, or
DYNAMIC using the Remote Controller or in the above menu.
Display Picture Adjust menu. Adjust any items, and these
figures are automatically stored.

Picture Adjust
Setting

Mode

Standard
1

Display
Config
Trigger 2
Memory

Memory

Advertising
This manual is related to the following products: