Marantz VP-12S1s User Manual

Page 7

Advertising
background image

3

INTRODUCTION

ENGLISH

z COMPONENT VIDEO IN

Y, P

B

/C

B

, P

R

/C

R

connectors.

Connect the COMPONENT VIDEO output from video
equipment or an A/V processor/receiver with a component
video output.

x S-VIDEO IN

Connect the S-VIDEO output from a video equipment.

c VIDEO IN

Connect the composite video output from a video equipment.

v RGB IN

Connect the analog RGB output from a computer equipment.

b AUX DV IN

Connect the i.LINK(DV-SD format) output from a video
equipment.

n AUX OPTICAL

Connect the optical input from an audio equipment.
Audio out terminal of DV-IN signal.

VP-12S1

z

c

m

⁄4

⁄6

⁄5

⁄0

,

⁄3

⁄2

⁄7

x

n

b

v

⁄1

.

Right Side and Rear

m AUX AUDIO OUT (DIGITAL)

Connect the COAXIAL input from an audio equipment.
Audio out terminal of DV-IN signal.

, REMOTE CONTROL IN/OUT

By connecting this projector to another Marantz audio
component using a supplied System Control cable, you can
remotely operate the components as a single system.
• When connecting to component with a remote sensor

(such as the SR-14,SR-18,SR-19), be sure to connect the
"REMOTE CONTROL IN" jack of this projector to the
"REMOTE CONTROL OUT" jack of the component with
the remote sensor.

• When connecting to component which is not equipped

with a remote sensor, be sure to connect the component
to the "REMOTE CONTROL OUT" jack of this projector.

. REMOTE switch (EXTERNAL/INTERNAL)

When using this projector independently, set this switch to
"INTERNAL". When using this projector in a system with a
Marantz DVD player or AV Receiver equipped with a remote
sensor, set the switch to "EXTERNAL".

⁄0 TRIG.1(TRIGGER 1)

When the unit is turned on, 12V is output. When the unit is
turned off, no voltage is output. This allows such as a powered
up/down screen,whenever the projector is turned on or off.

Advertising
This manual is related to the following products: