Marantz VP-12S1s - Manual (Page 24)

20
ENGLISH
Lamp Life
Display the remaining lamp life by pressing the INFO key on
the remote controller.
Notes:
• When the Lamp Life becomes less than 100 hours , it is
recommended to replace the lamp unit. A lamp may be
worn out when the Lamp Life becomes less than 100
hours .
• The projector is designed not to turn on after the lamp use
has exceeded 2000 hours. (Lamp Life 0 HOUR)
If the projector is in use, it will turn off.
3 3
When the lamp life becomes less than 100 hours and the
unit is still on, the remaining lamp life is displayed on the
screen automatically.
3 3
When the lamp life becomes less than 5 hours, the
remaining lamp life is displayed on the screen .
To clear above, press the MENU key.
Warning
Lamp Life 5 Hours
Warning
Lamp Life 100 Hours
Video Input
Memory
Cinema Mode
Noise Reduction
Aspect
Trigger
Lamp Life
Total Hours COMPONENT
Standard 1
Auto
6
Normal
On
1000 Hours
0 Hour
3 3 When the lamp life has expired (Lamp Life 0 HOURS),
the unit will be immediately turned off, and the WARNING
indicator will light up in red.
Replacing the lamp unit with new one, then use the following
procedure to reset (initialize) the lamp life.
Refer to "Replacing Lamp Unit".
1. Unplug the power cord.
2. Wait about one minute and reconnect the power cord.
3. Press the POWER key. The following message appears
for 120 seconds.
4. Select “Yes”, using the
1
/
2
keys.
5. Press the ENTER key. The lamp life indicator is now
initialized.
New Lamp ?
Yes No
Warning
Lamp Life 0 Hours
Lamp Life and Replace Lamp