Multi-Tech Systems MTASR3-200 - Manual (Page 11)

Chapter 1 - Introduction and Description
MTASR3-200 11
A Typical Network Application
A typical application of a RASFinder 200-Series is shown in Figure 1-2. In this application, the LAN
port is connected to a TCP/IP LAN. A remote node client is able to dial into WAN 1 on the
RASFinder. A PPP client is connected to WAN 2 and a Win95 Netware client is using WAN 3. All
three remote users are able to access shared services on the LAN and access the internet via a
shared internet port.
Internet
WinNT Web Server
Router or T1
IP Address = 206.16.196.254
T1-MUX
IP Address = 199.24.15.244
IP Address = 206.16.196.252
Novell File
Server
IP Address = 206.16.196.250
Unix Host
IP Address = 206.16.196.253
PPP Client (Trumpet, Win95)
IP Address = 206.16.196.102
Remote Node with TCP/IP
IP Address = 206.16.196.101
IP Address = 206.16.196.251
Mask = 255.255.255.0
Default Route = 206.16.196.254
(Address of router attaching Internet)
Win95 w/Netware Client and PPP
IP Address = 206.16.196.103
Figure 1-2. Typical network configuration.