Multi-Tech Systems MTASR3-200 - Manual (Page 25)

Chapter 3 - Software Loading and Configuration
MTASR3-200 25
3. Build your user database by filling in the following fields for each user.
User Name
The User Name can have as many as 39 characters. All printable characters are permitted with the
restriction that no blanks are allowed in the user name. In dial-in and dial-out applications, the user
name is treated as a case insensitive string.
User Password.
The User Password can have as many as 7 characters. In places where the password is used as a
character string, it is treated as a case insensitive string. Elsewhere (PPPs CHAP), it is treated as a
case sensitive pattern.
Call Back
You have to click this check box in order to access the following three Call Back functions.
Call Back Security Enabled
This parameter is of use in dial-in applications where the user is required to be called back at a
specific number. Enabling this parameter results in having the administrator assigning the callback
parameters. Leave this function disabled if the user is to be allowed to choose the call back number
and the call back delay.
Call Back Number
The call back number field is editable only if call back security is enabled (checked). This is the
number where the user will be called back. If call back security is enabled, the user cannot choose
the call back number.
Call Back Delay
Call back delay is editable only if call back security is enabled. This specifies the duration after which
this user will be called back at the administrator-assigned phone number.
Protocols
This lets you select the protocol(s) in which the user is allowed to dial into the RASFinder.
Dial In Ports
This allows you to select the port over which the user is permitted to dial into the RASFinder.
Dial Out Ports
This allows you to select the port over which the user is permitted to dial out from the RASFinder.
4. After each user is defined on the Add Users screen, click on the OK button to display the updated
Users List dialog box. Click on the Add User button to continue adding users to your database.
5. When you have added all your users to the database, from the Users List dialog box, click on the
Download button to load the database into the MultiRouter.