Multi-Tech Systems MTASR3-200 - Manual (Page 14)

RASFinder User Guide
MTASR3-200 14
Specifications
The RASFinder conforms to the following specifications:
• Routing Protocols - IP and IPX, and bridging for all others
• EtherNet LAN Interface - 10Base-T (twisted pair) or 10Base2 (ThinNet) AUI
• WAN Interface - 3 async or sync Links (RS232C/V.35)
• Frame relay networks for SLIP, PPP, Async and HDLC Sync devices
• Frame relay trunk speeds up to T1/E1 synchronous
• Command Port - 19.2K bps Asynchronous
• One 70-nanosecond 4MB SIMM and a connector for a 2nd 4MB SIMM
(RAM is expandable to a maximum of 32 MB)
Caution: SIMM speed and size cannot be mixed.
• 1 MB of Flash memory (on two PROMs)
EtherNet Port
• One Ethernet Interface - 10Base-T (twisted pair) RJ45 connector or 10Base-2 (ThinNet) BNC
connector
Command Port
• Single 19.2K bps asynchronous Command Port using a short RJ45-to-DB25 cable with a
DB25 female connector
WAN Links
• Three internal K56flex TM modems*
Electrical/Physical
• Voltage - 115 VAC (Standard), 240 VAC (Optional)
• Frequency - 47 to 63 Hz
• Power Consumption - 10 Watts
• Dimensions - 1.625" high x 6" wide x 9" deep
5.63 cm high x 22.34 cm wide x 33.51 cm deep
• Weight - 2 pounds (0.92 kg)
Requirement
• PC with Windows 3.1x or Windows 95, and one serial comm port to connect to the Command
Port of the RASFinder
* Though this modem is capable of 56K bps download performance, line impairments, public
telephone infrastructure and other external technological factors currently prevent maximum 56K
bps connections.