Muratec MFX-2500 - Manual (Page 77)

Entering settings for your machine
Image rotate transmission
Default setting: ON.
When this feature is activated, if you set A4-sized document in the sideways direc-
tion( ), the image will be sent rotated by 90°.
1 Press MENU , J , 0, 3, [Enter].
2 Choose desired setting you want using the
cursor key. Then press [Enter].
3 Press RESET to return to the standby mode.
Setting the confirmation stamp
Default setting: OFF.
You can set your fax machine so that it will automatically place a small blue ink
stamp mark on the front of each original document that it successfully scans.
Important: Turn off this feature if you’re sending documents you don’t want the
fax to stamp.
1 Press MENU , J , 1, 4, [Enter].
The LCD shows your fax’s current setting:
2 Select “On” or “Off” using the cursor key.
3 Press [Enter] to save the setting.
4 Press RESET to return to the standby mode.
3.3