Minolta Pi3505e/PS - Manual (Page 36)

S-5
3-2. Soft switch settings
(1) Specifying Printer Function Soft Switch Settings
• Mainly soft switches for modes related to printer functions are described.
• Features marked with asterisks can be specified by the user.
✽ Screen setting, ✽✽ Soft switch setting
• The settings in cells with black backgrounds are the settings that were specified during
production of the unit.
NOTE
Setting conditions for bits 7 through 0 of mode 432, wait time for computer printing with full
memory (M): Each must be set so that t2
t1 M.
For example, if the time for t2 and t1 are short, the time for bits 7 through 0 of mode 432,
wait time for computer printing with full memory (M), should also be short.
Note: Features marked with asterisks can be specified by the user. ✽ indicates screen settings.
Mode Factory Setting
320
7 6 5 4 3 2 1 0
Bit: 0 0 1 1 0 0 1 1 HEX:33
Bit Feature
Logical Value
Description
0 1
7 – 4 Computer printing
Around-the-clock monitoring
timer (t1) Bit 7-4: 0000 No timeout Time between commands
Specified in 10-minute intervals
0001 10 minutes
0010 20 minutes
0011 30 minutes
1111 150 minutes
3 – 0 Computer printing
Around-the-clock monitoring
timer (t2) Bit 3-0: 0000 No timeout Time between printing pages
Specified in 10-minute intervals
0001 10 minutes
0010 20 minutes
0011 30 minutes
1111 150 minutes