MicroNet Technology SP1659P - Manual (Page 103)

Argument:
<type_value>: Delay Priority: 0;
Throughput Priority: 1;
Reliability Priority: 2;
Monetary Cost Priority: 3.
<q>: queue level, q0: queue 0, q1: queue 1, q2: queue 2, q3: queue 3.
<priority>: priority level. One queue has been assigned 2 different priorities. You don't
need to use all of queues, but must assign queues in order (from low queue to high queue).
Syntax: 1, 2 or 2, 5-7, available from 0 to 7.
Possible value:
<type_value>: 0 to 3.
<priority>: 0 to 7.
Example:
SP1659P(qos)# set tos 0 q0 1 q1 2 q2 4 q3 6
set vip
Syntax: set vip <port_range> <mode>
Description: To set vip port for strict priority.
Argument:
<port_range>: syntax 1, 5-7, available from 1 to 26
<mode>: enable/disable vip port for each port. 1: enable. 0: disable.
Possible value:
<port_range>: 1 to 26
<mode>: 1 or 0
Example:
SP1659P(qos)# set vip 1-6 1
show
Syntax:
show dscp
show port
show priority-tag
show tos
Description: To display Qos configuration.
Argument: None
Possible value: None
Example:
SP1659P (qos)# show dscp
ip diffserv classification
====================
Global QoS mode: Disable QoS
Disable 802.1p Priority
Disable ip tos classification
Disable ip diffserv classification
Scheduling: weighted round robin method.
Weight: wrr 0 = 1; wrr 1 = 2; wrr 2 = 4; wrr 3 = 8.
Weighted range: 1~55.
P0~63: Priority 0~63.
Default mode: Queue0: P0~15; Queue1: P16~31; Queue2: P32~47; Queue3: P48~63.
102