MicroNet Technology SP1659P - Manual (Page 80)

Example:
SP1659P(bandwidth)# set egress-rate 1-16 299
set ingress-rate
Syntax: set ingress-rate <range> <data_rate>
Description: To setup the Ingress-rate of the port.
Argument:
<range>:syntax 1,5-7, available from 1 to 26
<data_rate>: 66-1024000(Kb). #1-24: 66-102400(Kb, # 25-26: 66-1024000(Kb)
Possible value:
<range>: 1 to 26
<data_rate>: #1-24: 66-102400(Kb), # 25-26: 66-1024000(Kb)
Example:
SP1659P(bandwidth)# set ingress-rate 1-16 100
set storm-rate
Syntax: set storm-rate <range> <data_rate>
Description: To setup the storm-ate of the port.
Argument:
<range>:syntax: 1,3-5, available from 1 to 5
1: Disable 2: Broadcast Storm Control
3: Multicast Storm Control
4: Unknown Unicast Storm Control
5: Broadcast, Multicast, Unknown Unicast Storm Control
<data_rate>: 1-100. The value must be the integer. The value 100 disables broadcast storm control.
Possible value:
<range>: 1 to 5
<data_rate>: 1-100.
Example:
SP1659P(bandwidth)# set storm-rate 2 99
show
Syntax: show
Description: To display all current settings of the bandwidth.
Argument: None
Possible value: None
Example:
SP1659P(bandwidth)# show
Port Ingress Rate(Kb) Egress Rate(Kb)
====== ================== =================
1 102400 102400
2 102400 102400
3 102400 102400
4 102400 102400
5 102400 102400
6 102400 102400
7 102400 102400
8 102400 102400
9 102400 102400
10 102400 102400
11 102400 102400
12 102400 102400
79