MicroNet Technology SP1659P - Manual (Page 5)

1.3 Physical Description
SP1659P front view
RESET Button
The button provides users to restart the switch.
LEDSET Button:
It is used to change LED display mode (ACT / FDX / SPD).
LED Status
Please refer to the following table for LED definition
LED Status Operation
POWER On/Green Power is on
CPU Blink/Green CPU is active
ACT On/Green LEDSET set to Active mode
FDX On/Green LEDSET set to FDX mode
SPD On/Green LEDSET set to Speed mode
10/100M Port (#1 - #24):
LINK On/Green Link detected
Traffic detected (ACT mode)
Full duplex (FDX mode)
ACT/FDX/SPD On/Amber
100M link (SPD mode)
PoE Status On/Green PoE is active
Gigabit Port (#25 - #26):
LINK On/Green Link detected
mini-GBIC On/Green 1000M fiber link detected
Traffic detected (ACT mode)
Full-duplex (FDX mode)
ACT/FDX/SPD On/Green
1000M link (SPD mode)
4