MicroNet Technology SP1659P - Manual (Page 115)

SP1659P(trunk)# set hash 2
SP1659P(trunk)#
set trunk
Syntax: set trunk <port-range> <method> <group> <active LACP>
Description: To set up the status of trunk, including the group number and mode of the trunk as well as
LACP mode.
Argument:
<port-range> : port range, syntax 1,5-7, available from 1 to 24
<method>:
static : adopt the static link aggregation
lacp : adopt the dynamic link aggregation- link aggregation control protocol
<group>: 1-8.
<active LACP>:
active : set the LACP to active mode
passive : set the LACP to passive mode
Possible value: None
Example:
SP1659P(trunk)# set trunk 1-4 lacp 1 active
show aggtr-view
Syntax: show aggtr-view
Description: To display the aggregator list.
Argument: None
Possible value: None
Example:
SP1659P(trunk)# show aggtr-view
Aggregator 1) Method: None
Member Ports: 1
Ready Ports:1
Aggregator 2) Method: LACP
Member Ports: 2
Ready Ports:
:
:
:
show lacp-config
Syntax: show lacp-config
Description: To display the value of LACP Priority.
Argument: None
Possible value: None
Example:
SP1659P(trunk)# show lacp-config
LACP System Priority : 32768
Hash Method
: DA and SA
show lacp-detail
Syntax: show lacp-detail <aggtr>
Description: To display the detailed information of the LACP trunk group.
Argument: <aggtr>: aggregator, available from 1 to 24
Possible value: <aggtr>: 1 to 24
114