Meco 6623S8E641 - Manual (Page 11)

11
Step 7
Side Tables to Cart Frame Assembly
Attach the Side Tables to the Legs of the Cart Frame as shown with 8) 1/4-20 x .79” Bolts (4 each Side Table). Place the
dimpled side of the Side Table Supports against the legs and align the holes. Insert the bolts through the supports and
into the threaded inserts in the legs.
5/32 x .39” Bolt
2 pc
Step 8
Heat Shield Assembly
Attach the Control Panel Heat Shield to the top of the Front U-Leg with 2) 5/32-30 x .39” Bolts. The heat shield will be
inside the cart frame.
The Cylinder Heat Shield is shown here for location reference only and will be attached in a later step at the same time
as the Bowl.
1/4-20 x .79” Bolt
8 pc
Left Side Table
Right Side Table
Left Side Table
Right Side Table
Cylinder Heat Shield
(Shown for reference only)
Control Panel
Heat Shield
To reduce the risk of a laceration hazard, wear protective gloves when handling parts that have sharp edges.
CAUTION
!