Caution – Meco 6623S8E641 User Manual
Page 20
20
To reduce the risk of a laceration hazard:
• Wear protective gloves when installing warming rack. Hood and Bowl edges could be sharp.
CAUTION
!
Step 22
Flavor Activator / Warming Rack Assembly
A.
Place Flavor Activator on Supports in Bowl.
B.
Install Warming Rack as follows: First insert legs 1 and 2 in holes on right side of Bowl and Hood. Next, while hold-
ing leg 3, insert leg 4 into hole in left side of Hood. Last, carefully insert leg 3 into hole in Bowl and gently allow it to
spring outward into position.
A
B
A
B
2
1
3
4
Rounded
Corners
Step 23
Cooking Grid / Control Knob Assembly
A.
Place the Cooking Grids onto ledge in Bowl. Rounded corners are placed to the outside edge of the Bowl.
B.
Align the flat keyed hole in the Control Knob with the keyed stem of the valve. Push the knob onto the valve stem.
Repeat for all valves. NOTE: The Side Burner Control Knob is smaller than the main knobs and located on the far left.