Meco 6623S8E641 - Manual (Page 17)

17
Step 17
Side Burner Electrode Assembly
A. Insert small end of Electrode Wire down through hole in Side Table until metal tab with hole is seated over small
threaded hole. See next page for plug location.
B. Fasten Electrode in place to Side Table with 1) 5/32 x .39” Bolt and 5/32-30 Nut.
Step 18
Side Burner Assembly
A. Insert tube of Side Burner down through center hole in Side Table until metal tab with hole is seated over small
threaded hole.
B. Before bolt is inserted, verify that valve nozzle is properly inserted into the end of the burner tube. End of tube will
rest loosely against bend in valve
C. Fasten Burner in place with 2) 5/32 x .39” Bolt.
5/32 x .39” Bolt
2 pcs
5/32 x .39” Bolt
5/32-30 Nut
1 pc each
A
A
B
B
C
B
C