Meco 6623S8E641 User Manual
Page 12
Advertising
12
Step 9
Shroud Assembly
A.
Lay the Control Panel and Left, Right and Bottom Shroud Frames face down on floor (on a protective surface). Align
brackets at corners and fasten together with 8) 1/4-20 x .39” Bolts and Nuts.
B.
Place the Shroud on the assembled frame and align the holes in the shroud with the holes in the tabs on the frame.
Fasten the Shroud to the shroud frame with 12) #5 x .31” Tapping Screws.
#5 x .31” Tapping Screw
12 pcs.
1/4-20 x .39” Bolt
and Nut
8 pc Each
A
B
Control Panel
Right Shroud Frame
Bottom Shroud Frame
Left Shroud Frame
Shroud
Advertising