Motorola DCT3080 - Manual (Page 25)

DCT3080 Installation Manual
19
1 Start the Diagnostics as described in Section 4, “Diagnostics.” d 01
is displayed on the front-panel LED.
2 Using a remote control, within five seconds press
REPLAY
,
MY DVR
three times, and LIVE TV . (On some remote controls, the MY DVR key
may be labeled “ LIST .”)
If you correctly enter this key sequence in five seconds or less, the
hard drive is cleared and the front-panel LED displays
Clr .
3 If Clr is not displayed, re-enter the key sequence in step 2.
If Clr is displayed, press any other key to reset the terminal, turn it
off, and complete the clearing process.
Video Connection Options
Use the following guidelines to determine the best video connection for
the subscriber home entertainment system. To determine the available
video inputs on the TV, check the manual supplied with the TV or the TV
itself.
The DCT3080 offers the following video outputs:
S-Video
SDTV
only
If your TV has an S-Video input, use S-Video. S-Video is
the highest quality standard-definition video output on
the DCT3080.
Video
(composite)
SDTV
only
If your TV does not have an S-Video input, use the
composite video (
VIDEO
) output.
RF
SDTV
only
If your TV only has a coaxial RF input, connect it to the
DCT3080
RF OUT
connector.