Dct3080 installation manual – Motorola DCT3080 User Manual
Page 84
DCT3080 Installation Manual
78
Field Description
eCM
Registered
Displays whether the embedded cable modem has registered
with the cable modem termination system (CMTS):
YES — DOCSIS registration is complete
NO — DOCSIS registration is in progress or the set-top
could not register
N/A — The value is invalid or cannot be retrieved, or
DOCSIS is not enabled
Network
Access
Displays whether the cable modem has been granted access to
the DOCSIS network:
YES — The cable modem was granted DOCSIS network
access
NO — The set-top is obtaining DOCSIS network access
N/A — The value is invalid or cannot be retrieved, or
DOCSIS is not enabled
Initialize BPI
The Baseline Privacy Interface (BPI) status:
YES — BPI has been successfully initialized for the cable
modem
NO — BPI initialization is in progress, has failed, or was
not requested by the network
N/A — The value is invalid or cannot be retrieved, or
DOCSIS is not enabled
System Up
Time
The Days, Hours, Mins (minutes) and Seconds the DOCSIS
system has been operational. If the value is invalid or cannot be
retrieved, or DOCSIS is not enabled, each field displays zeros.
IP Addresses
The Cable Modem and Set-Top IP addresses in dotted-
decimal format xxx.xxx.xxx.xxx. Each byte value is padded with
zeros when necessary. For example, 10.0.1.10 is displayed as
010.000.001.010. If the value is invalid or cannot be retrieved,
or DOCSIS is not enabled, 000.000.000.000 is displayed.
MAC
Addresses
The Cable Modem and Set-Top MAC address in hexadecimal
format xx:xx:xx:xx:xx:xx. Each byte value xx ranges from 00 to
FF and is padded with zeros when necessary. For
example,0:0:2D:1:F1:D is displayed as 00:00:2D:01:F1:0D. If
the value is invalid or cannot be retrieved, or DOCSIS is not
enabled, 00:00:00:00:00:00 is displayed.