Motorola DCT3080 - Manual (Page 86)

DCT3080 Installation Manual
80
Frequency
The center frequency of the channel to which the DOCSIS
upstream channel receiver is tuned. It can be 5 to 42 MHz. If
the value is invalid or cannot be retrieved, Carrier Lock is NO;
if DOCSIS is not enabled, N/A is displayed.
Mode
The DOCSIS upstream channel modulation: QPSK, QAM 8,
QAM 16, QAM 32, QAM 64, or QAM 128. If the value is invalid
or cannot be retrieved, or DOCSIS is not enabled, N/A is
displayed.
Channel
ID
The upstream channel identifier 0 to 255. If the value is invalid
or cannot be retrieved, or DOCSIS is not enabled, N/A is
displayed.
Power
Level The upstream channel power level in dBmV. If the value is
invalid or cannot be retrieved, or DOCSIS is not enabled, 000
is displayed.
Symbol
Rate
The upstream channel symbol rate in mega-symbols per
second. If the value is invalid or cannot be retrieved, or
DOCSIS is not enabled, 0.000 is displayed.
Known MAC
Addresses
Displays up to 32 MAC addresses learned by the DCT3080
cable modem, including the Set-Top MAC and future MAC
addresses assigned by DSG, in hexadecimal format
xx:xx:xx:xx:xx:xx
on two screens if necessary. If the value is
invalid or cannot be retrieved, or DOCSIS is not enabled, no
values are displayed.