Multi-Tech Systems MT128ZLX-NT - Manual (Page 102)

MultiMobile MT128ZLX User Guide 4: Windows NT Driver Procedures
95
10. When the restart process is complete, the HW Detect window will appear.
This screen presents the IRQ values and base-I/O addresses that are available in the computer. Available
resources are marked with a green check. Resources already in use are marked with a red “X.”
This is an informational screen only.
Click OK.
NOTE: The resource information presented on the HW Detect screen is also available at Start | Programs
| Administrative Tools | Windows NT Diagnostics .
Then select the Resources tab.
Click on the IRQ button to see the IRQ resources already in use.
Click on I/O Port to see the base-I/O addresses already in use.