Multi-Tech Systems MT128ZLX-NT - Manual (Page 213)

MultiMobile MT128ZLX User Guide 6: Windows ME API Usage
206
Windows ME Vcomm: Single Channel Access Example
NOTE: To complete this procedure, you will need to know several technical details that can be provided by
your ISP or by your network administrator.
1. You will need to know whether or not an encrypted password is needed to access the
network to which you will be connected.
2. If you are connecting to a non-Windows server, you will also need to know in advance
whether or not the server requires you to type in login information or to know TCP/IP
addresses before dialing.
3. If applicable, you will need to know the domain name of the network to which you will be
connected.
4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).
1. Go to Start | Programs | Accessories | Communications | Dial-Up Networking. If this is your first
communications connection, the Welcome to Dial-Up Networking screen will appear. Otherwise, click
on the Make New Connection icon.
Click Next>.
2. The Make New Connection screen appears. Enter a descriptive name for the connection. In the
“Select a device” drop-down box, highlight MultiMobile MT128ZLX-ST (modem). Click Next>.