Multi-Tech Systems MT128ZLX-NT - Manual (Page 145)

MultiMobile MT128ZLX User Guide 5: Windows 2000 Driver Procedures
138
MT128ZLX-ST/NT: Windows 2000 Driver Procedures
Windows 2000 Installation
NOTE: Before beginning the installation, you must obtain the following technical information from your
telephone company:
SPIDs (North America only)
Switch Type
Voice Encoding scheme
Telephone Number(s)
NOTE: To install, configure, and remove devices in Windows 2000, your logon permissions must include
the ability to load and remove device drivers.
NOTE: As you begin this procedure, the MT128ZLX card should not be installed in the computer’s
PCMCIA slot. The setup.exe file must be run before the card is installed. Otherwise problems
will arise as Windows 2000 detects the device.
1. For now, leave the MT128ZLX card out of the computer’s PCMCIA slot.
2. Insert the MT128ZLX Installation CD into the computer’s CD-ROM drive.
3. Using Windows Explorer, browse to the win2000 directory on the MT128ZLX Installation CD.
4. Double-click on the Setup.exe file to launch the Configuration Utility Setup program.
At the Welcome screen, click Next>.