Multi-Tech Systems MT128ZLX-NT - Manual (Page 160)

MultiMobile MT128ZLX User Guide 5: Windows 2000 API Usage
153
Windows 2000 NDIS: Single Channel Access Example
NOTE: To install, configure, and remove devices in Windows 2000, your logon permissions must include
the ability to load and remove device drivers.
NOTE: To complete this procedure, you will need to know several technical details that can be provided by
your ISP or by your network administrator.
1. You will need to know whether or not an encrypted password is needed to access the network
to which you will be connected.
2. If you are connecting to a non-Windows 2000 server, you will also need to know in advance
whether or not the server requires you to type in login information or to know TCP/IP addresses
before dialing.
3. If applicable, you will need to know the domain name of the network to which you will be
connected.
4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).
1. Go to Start | Programs | Accessories | Communications | Network and Dial-Up Connections.
The Network Connection Wizard screen will appear. At this ‘welcome’ screen, click Next>.