Multi-Tech Systems MT128ZLX-NT User Manual
Page 246
MultiMobile MT128ZLX User Guide
Appendix D: Using AT Commands
239
Command
Options
Function & Description
AT&L0
Load user profile 0 to active RAM.
AT&L1
Load user profile 1 to active RAM.
AT&L2
Load user profile 2 to active RAM.
AT&L3
Load user profile 3 to active RAM.
AT&L4
Load user profile 4 to active RAM.
AT&L5
Load user profile 5 to active RAM.
AT&L6
Load user profile 6 to active RAM.
AT&L7
Load user profile 7 to active RAM.
AT&L8
Load user profile 8 to active RAM.
AT&L9
Load user profile 9 to active RAM.
AT&N0=0
Set Single-Link mode for Async to Sync PPP Conversion.
AT&N0=1
Set Multi-Link mode for Async to Sync PPP Conversion.
AT&P0
Copy user profile 0 to profile E, and set it as power-up profile.
AT&P1
Copy user profile 1 to profile E, and set it as power-up profile.
AT&P2
Copy user profile 2 to profile E, and set it as power-up profile.
Command
Options
Function & Description
AT&P3
Copy user profile 3 to profile E, and set it as power-up profile.
AT&P4
Copy user profile 4 to profile E, and set it as power-up profile.
AT&P5
Copy user profile 5 to profile E, and set it as power-up profile.
AT&P6
Copy user profile 6 to profile E, and set it as power-up profile.
AT&P7
Copy user profile 7 to profile E, and set it as power-up profile.
AT&P8
Copy user profile 8 to profile E, and set as it power-up profile.
AT&W0
Save current active settings in RAM to user profile 0.
AT&W1
Save current active settings in RAM to user profile 1.
AT&W2
Save current active settings in RAM to user profile 2.
AT&W3
Save current active settings in RAM to user profile 3.
AT&W4
Save current active settings in RAM to user profile 4.
AT&W5
Save current active settings in RAM to user profile 5.
AT&W6
Save current active settings in RAM to user profile 6.
AT&W7
Save current active settings in RAM to user profile 7.
AT&W8
Save current active settings in RAM to user profile 8.
AT&W9
Save current active settings in RAM to user profile E.
Command
Options
Function & Description
AT&Z0
Set the Secondary Dial Number for Async to Sync Multi-link PPP Mode.
AT&V
Display current configuration
AT&Zn=x
Store phone number n as x
n
index number 0, 1, 2….
x
saved phone number