Multi-Tech Systems MT128ZLX-NT - Manual (Page 119)

MultiMobile MT128ZLX User Guide 4: Windows NT API Usage
112
Windows NT4 NDIS: Single Channel Access Example
NOTE: To install, configure, and remove devices in Windows NT, your logon permissions must include the
ability to load and remove device drivers.
NOTE: To complete this procedure, you will need to know several technical details that can be provided by
your ISP or by your network administrator.
1. You will need to know whether or not an encrypted password is needed to access the network
to which you will be connected.
2. If you are connecting to a non-Windows NT server, you will also need to know in advance
whether or not the server requires you to type in login information or to know TCP/IP addresses
before dialing.
3. If applicable, you will need to know the domain name of the network to which you will be
connected.
4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).
5. You will need to know how to configure your port usage (dial-out calls only, receive calls only,
dial-out and receive calls).
1. Go to Start | Programs | Accessories | Dial-Up Networking. If this is your first communications
connection, the Dial-Up Networking screen will appear.
2. The Dial-Up Networking Wizard will be launched.
Click New.