Verifying the windows 2000 installation – Multi-Tech Systems MT128ZLX-NT User Manual
Page 151
MultiMobile MT128ZLX User Guide
5: Windows 2000 Driver Procedures
144
16. A completion screen appears.
Click Finish.
17. You will be prompted to restart your computer. Click Yes. The driver installation procedure is now
complete. However, before you can use your MT128ZLX in Windows 2000, it must be configured with
SPIDs (in the U.S. and Canada), telephone numbers, voice-encoding information, and switch-type
information. (See the procedure “Configuring the MT128ZLX In Windows 2000” below.)
Verifying the Windows 2000 Installation
1. Go to Start | Settings | Control Panel. Click on the System icon. Click on the Hardware tab. Click on
the Device Manager button.
2. After a successful driver installation, the Device Manager will contain the following entries:
Intelligent PCMCIA ISDN TA (ISDN) \ MultiMobile MT128ZLX-ST (ISDN)