Maxtor SLD240 - Manual (Page 20)

19
4.2.3 Alarm Recording
Take the following steps to activate the programmed alarm recording. For ALM OPERATION, REC
RATE, REC QUALITY, AUDIO , ALM TYPE, ALM DURATION, and PRE-ALARM settings, please
refer to Section 5.2 for more details.
(1) Press the Setup button to enter the MAIN MENU.
(2) Select ALARM and press the Enter button to enter the ALARM SETTING.
(3) Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio
is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to ON.
(4) To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM
OPERATION to OFF.
(5) To activate the motion alarm recording, select MOTION SETTING and press the Enter button
to enter the MOTION SETTING PAGE. Set MOTION ENABLE TO ON, and set the sensitivity
level that will trigger motion alarm recording. (1 is most sensitive; 5 is least sensitive).
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM PAGE
ALARM SETTING
ALM OPERATION : OFF
REC RATE : 20F/S
REC QUALITY : BEST
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 0 SEC
PRE- ALARM : OFF
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
ALARM SETTING
ALM OPERATION : OFF
REC RATE : 20F/S
REC QUALITY : BEST
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 0 SEC
PRE- ALARM : OFF
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
MOTION SETTING
MOTION ENABLE
: ON
SENSITIVITY : 3
MAIN PAGE
SET MOTION DETECTION
?