Maxtor SLD240 - Manual (Page 42)

41
MENU BACKGND:
There are 3 levels of background color transparency you can choose from : level 1 is totally
transparent, level 3 is opaque, and level 2 is between level 1 and 3. The background color is
used in the setup menu and search function.
BUZZER:
This option determines the embedded buzzer sounding a tone to signal the following
situations. A tone lasts about two seconds long.
ON: Enables buzzer.
OFF: Disables buzzer.
Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer set to ON
Enable/disable key lock function
Power on /off mobile rack HDD
Backup operation complete
Timer activate/deactivate
Recording switching between HDD
PASSWORD:
This option allows you to set a password to prevent any unauthorized re-formatting of the
hard disk drives or use by a network viewer. The standard password is “9999”.
OLD PASSWORD: Enter the pre-set password (or the standard password if this is the
initial setting) to access the password setting system.
NEW PASSWORD: Enter a 4-digit-number password of your choosing which will replace
the pre-set password (or the standard password “9999”).
Important: Do not forget the password you create as the process can not be
reversed without the proper password. Write down your password
and save it in a secure location, if necessary.
SETUP PWD:
When this option is on, the user must clear the password check before entering the setup
menu.
ON: Enables it.
OFF: Disables it.