Moyer Diebel 301HT M2 - Manual (Page 10)

2
Care should be taken when lifting the machine to prevent damage.
The machine is normally shipped on a skid enclosed by straps. When transporting the machine,
use a lift truck or fork lift, positioning the box properly on the forks.
1. Immediately after unpacking your machine, inspect for any shipping damages. If damage is
found, save the packing material and contact the carrier immediately.
2. Remove the dishwasher from the skid. Adjust the feet if required, then move the machine to
its permanent location.
3. Level the machine (if required) by placing a level on the top if the machine and adjusting the
feet. Level the machine front-to-back and side-to-side.
4. Remove any foreign material from inside of the machine.
Receiving
Note:
Installers must follow applicable sanitation, safety, plumbing, and electrical codes
and regulations; and work in accordance with best practices for dishwasher
installation.
Installation