Operation, Operation procedures – Moyer Diebel 301HT M2 User Manual
Page 16
8
Operation
Operation Procedures
1. Check that the spray arms, overflow tube and scrap screens are in place.
2. Close the door. Press the
POWER switch. The tank will begin to fill with water.
This procedure is only needed when the tank is empty.
3. When the tank is full, check the wash tank temperature gauge. Minimum wash temperature
is
150°F/66°C.
4. Scrap and preflush all items to be washed, load items into rack. Wash only one layer of
silverware in a rack at a time.
Note: DO NOT OVERLOAD the rack.
5. Open the door and insert the rack of wares into the machine.
6. Close the door. Press the
START switch and hold for 1 second, then release. This will start
the wash cycle. The light illuminates.
Note: The machine may be stopped at any time during the cycle by opening the door. Closing
the door resumes the cycle where it was stopped.
Operation