MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 104)

F940GOT-SWD-E/LWD-E Additional Functions (in Ver3.00 or later) 7.
7-6
• System configuration
• Connection
* Because the RS-232C connector is used to connect a bar code reader, the printout func-
tion and the two-port interface function are not available while a bar code reader is con-
nected.
When the F940GOT is connected to a PC unit via RS-232C, any bar code reader cannot
be connected.
1:None
2:RD(RXD)
3:SD(TXD)
4:DTR
5:SG
6:DSR
7:RTS
8:CTS
9: ---
5
4
3
2
1
9
8
7
6