MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 30)

F940GOT-SWD-E/LWD-E Installation, Wiring and General Specifications 2.
2-2
The GOT is to be embedded in a panel. Perform the installation procedure described below.
1) Machining the mounting panel face
On the panel face, drill a mounting hole of the dimensions
shown on the right.
* Make sure that the plate thickness of the mounting panel
is 5 mm (0.2 inches) or less.
2) Inserting the GOT into the panel face
Attach a packing to the GOT. Insert the GOT from the front
of the panel face.
a) GOT
b) Packing
c) Mounting hole
153 (6.02 ) +1
- 0
mm
(inches)
12
1 (4.76 )
+1 -0
+0.04
- 0.00
+0.04 - 0
.00
a)
b)
c)