MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 71)

F940GOT-SWD-E/LWD-E Startup 3.
3-5
3.2 Operation environment setting
The operation environment setting function performs initial setting important to operation of the
GOT. The SET-UP MODE screen can be displayed by turning on the power while pressing and
holding the upper left corner of the screen in accordance with "3.1 Startup procedure" or by
selecting "SET-UP MODE" on the OTHER MODE screen.
If an entry code has been registered using the security function (described in the F940GOT
Operation Manual offered separately), however, the operation environment can be set only
when an entry code input by the user is equivalent to the registered entry code.
PLC TYPE
SERIAL PORT
OPENING SCREEN
MAIN MENU CALL KEY
CLEAR USER DATA
[ SET-UP MODE ] END
[ SET-UP MODE screen ]
LCD CONTRAST
LANGUAGE
SET CLOCK
SET BACKLIGHT
BUZZER
k)
l )
l )
a)
b)
c)
d)
e)
f)
g)
h)
i )
j )
Turn on the power while pressing and
holding the upper left corner of the screen.
Set the system language (Refer to p. 44.).
Press the END key.
The SET-UP MODE screen is displayed.