MITSUBISHI ELECTRIC F940GOT-SWD-E - Manual (Page 77)

F940GOT-SWD-E/LWD-E Startup 3.
3-11
•Set the serial communication parameters for the printer
used to print out alarm messages and sampling data.
•Make sure to set "PRINTER" to "USE" when a printer is
connected.
When it is set to "USE", the two-port interface
function is not available.
•The areas enclosed with broken lines function as touch
keys.
Every time a touch key is pressed, the displayed con-
tents are changed over.
•When "LINK PORT (RS232C)" is selected on the PLC
TYPE screen, any printer cannot be connected.
9600 bps
7 bit
1 bit
[ SERIAL PORT] END
[ SERIAL PORT]
Even
XON/XOFF
NOT USED
SPEED
DATA BIT
STOP BIT
PARITY
HANDSHAKING
PRINTAER
:
:
:
:
:
: